Phoenix Double-level terminal - UTTB 2,5

182 In stock
SKU
3044636
€5.15 €4.19

Details

Product properties
Product typeMulti-level terminal block
Area of applicationRailway industry
Machine building
Plant engineering
Process industry
Number of connections4
Number of rows2
Potentials2
Insulation characteristics
Overvoltage categoryIII
Degree of pollution3
Electrical properties
Rated surge voltage6 kV
Maximum power dissipation for nominal condition0.77 W
Connection data
Number of connections per level2
Nominal cross section2.5 mm²
Level 1+2
Screw threadM3
Tightening torque0.5 ... 0.6 Nm
Stripping length9 mm
Internal cylindrical gageA3
Conductor cross section solid0.14 mm² ... 4 mm²
Cross section AWG26 ... 12
Conductor cross section flexible0.14 mm² ... 4 mm²
Conductor cross section, flexible [AWG]26 ... 12
Flexible conductor cross section flexible (ferrule, w/o plastic sleeve)0.14 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve)0.14 mm² ... 2.5 mm²
2 conductors with same cross section, solid0.14 mm² ... 1.5 mm²
2 conductors with same cross section, flexible0.14 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve0.14 mm² ... 1.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve0.5 mm² ... 1.5 mm²
Nominal current24 A
Maximum load current28 A (in case of a 4 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.)
Nominal voltage500 V
Nominal cross section2.5 mm²
Ex data
Rated data (ATEX/IECEx)
ATEX certificateKEMA 06 ATEX 0017 U
IEC Ex certificateIECEx  KEM 06.0013 U
Identification II 2 GD  Ex eb IIC Gb
Operating temperature range-60 °C ... 110 °C
Ex-certified accessories3047293 D-UTTB 2,5/4
3047303 DP-UTTB 2,5/4
3047316 ATP-UTTB 2,5/4
1205053 SZS 0,6X3,5
3022276 CLIPFIX 35-5
3022218 CLIPFIX 35
Bridge data20 A / 2.5 mm²
Ex temperature increase40 K (22.5 A / 2.5 mm²)
Rated voltage320 V
for bridging with bridge352 V
- At bridging between non-adjacent terminal blocks352 V
- At bridging between non-adjacent terminal blocks via PE terminal block275 V
- At cut-to-length bridging with cover220 V
- At cut-to-length bridging with partition plate176 V
Rated insulation voltage320 V
Ex level General
Rated current20 A
Maximum load current24 A
Ex connection data General
Torque range0.5 Nm ... 0.6 Nm
Nominal cross section2.5 mm²
Rated cross section AWG14
Connection capacity rigid0.14 mm² ... 4 mm²
Connection capacity AWG26 ... 12
Connection capacity flexible0.14 mm² ... 2.5 mm²
Connection capacity AWG26 ... 14
2 conductors with same cross section, solid0.14 mm² ... 1.5 mm²
2 conductors with the same cross-section AWG rigid26 ... 16
2 conductors with same cross section, stranded0.14 mm² ... 1.5 mm²
2 conductors with the same cross-section AWG flexible26 ... 16
Ex level Level 1
Contact resistance0.6 mΩ
Ex level Level 2
Contact resistance0.4 mΩ
Dimensions
Width5.2 mm
End cover width2.2 mm
Height64.4 mm
Height NS 35/1572.5 mm
Height NS 35/7,565 mm
Length69.9 mm
Material specifications
Colorgray
Flammability rating according to UL 94V0
Insulating material groupI
Insulating materialPA
Static insulating material application in cold-60 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21))125 °C
Relative insulation material temperature index (Elec., UL 746 B)130 °C
Fire protection for rail vehicles (DIN EN 45545-2) R22HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354)27,5 MJ/kg
Surface flammability NFPA 130 (ASTM E 162)passed
Specific optical density of smoke NFPA 130 (ASTM E 662)passed
Smoke gas toxicity NFPA 130 (SMP 800C)passed
Electrical tests
Surge voltage test
ResultTest passed
Temperature-rise test
Requirement temperature-rise test45 K
ResultTest passed
Short-time withstand current 2.5 mm²0.3 kA
Short-time withstand current 4 mm²0.48 kA
ResultTest passed
Power-frequency withstand voltage
Test voltage setpoint1.89 kV
ResultTest passed
Mechanical properties
Mechanical data
Open side panelYes
Mechanical tests
Mechanical strength
ResultTest passed
Attachment on the carrier
DIN rail/fixing supportNS 35
Test force setpoint1 N
ResultTest passed
Test for conductor damage and slackening
Rotation speed10 rpm
Revolutions135
Conductor cross section/weight0.14 mm² / 0.2 kg
2.5 mm² / 0.7 kg
4 mm² / 0.9 kg
ResultTest passed
Environmental and real-life conditions
Needle-flame test
Time of exposure30 s
ResultTest passed
Oscillation/broadband noise
SpecificationDIN EN 50155 (VDE 0115-200):2008-03
SpectrumService life test category 1, class B, body mounted
Frequencyf1 = 5 Hz to f2 = 150 Hz
ASD level1.857 (m/s²)²/Hz
Acceleration0.8g
Test duration per axis5 h
Test directionsX-, Y- and Z-axis
ResultTest passed
Shocks
SpecificationDIN EN 50155 (VDE 0115-200):2008-03
Pulse shapeHalf-sine
Acceleration5g
Shock duration30 ms
Number of shocks per direction3
Test directionsX-, Y- and Z-axis (pos. and neg.)
ResultTest passed
Ambient conditions
Ambient temperature (operation)-60 °C ... 105 °C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport)-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
Ambient temperature (assembly)-5 °C ... 70 °C
Ambient temperature (actuation)-5 °C ... 70 °C
Permissible humidity (storage/transport)30 % ... 70 %
Standards and regulations
Connection in acc. with standardIEC 60947-7-1
Mounting
Mounting typeNS 35/7,5
NS 35/15
Your basket View Cart