The store will not work correctly in the case when cookies are disabled.
Product properties| Product type | Feed-through terminal block |
| Area of application | Railway industry |
| Machine building |
| Plant engineering |
| Process industry |
| Number of connections | 2 |
| Number of rows | 1 |
| Potentials | 1 |
| Insulation characteristics |
| Overvoltage category | III |
| Degree of pollution | 3 |
Electrical properties| Rated surge voltage | 8 kV |
| Maximum power dissipation for nominal condition | 2.43 W |
Connection data| Number of connections per level | 2 |
| Nominal cross section | 16 mm² |
| Level 1 above 1 below 1 |
| Screw thread | M5 |
| Tightening torque | 2.5 ... 3 Nm |
| Stripping length | 14 mm |
| Internal cylindrical gage | A7 |
| Connection in acc. with standard | IEC 60947-7-1 |
| Conductor cross section solid | 1.5 mm² ... 25 mm² |
| Cross section AWG | 16 ... 4 |
| Conductor cross section flexible | 1.5 mm² ... 25 mm² |
| Conductor cross section, flexible [AWG] | 16 ... 4 |
| Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 1 mm² ... 16 mm² |
| Flexible conductor cross section (ferrule with plastic sleeve) | 1 mm² ... 16 mm² |
| 2 conductors with same cross section, solid | 1 mm² ... 6 mm² |
| 2 conductors with same cross section, flexible | 1 mm² ... 6 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 1 mm² ... 6 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.75 mm² ... 10 mm² |
| Nominal current | 76 A |
| Maximum load current | 101 A (with 25 mm² conductor cross section) |
| Nominal voltage | 1000 V |
| Note | Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. |
| Nominal cross section | 16 mm² |
Ex data| Rated data (ATEX/IECEx) |
| ATEX certificate | KEMA 04 ATEX 2048 U |
| IEC Ex certificate | IECEx KEM 06.0027 U |
| Identification | Ex eb IIC Gb |
| Operating temperature range | -60 °C ... 110 °C |
| Ex-certified accessories | 3047206 D-UT 16 |
| 1205066 SZS 1,0X4,0 VDE |
| 3022276 CLIPFIX 35-5 |
| 3022218 CLIPFIX 35 |
| Plug-in bridge / FBS 2-12 / 3005950 |
| Bridge data | 73.5 A / 16 mm² |
| Ex temperature increase | 40 K (80.5 A / 16 mm²) |
| Rated voltage | 630 V |
| for bridging with bridge | 690 V |
| Rated insulation voltage | 630 V |
| Ex level General |
| Rated current | 73.5 A |
| Maximum load current | 89.5 A |
| Contact resistance | 0.16 mΩ |
| Ex connection data General |
| Torque range | 2.5 Nm ... 3 Nm |
| Nominal cross section | 16 mm² |
| Rated cross section AWG | 6 |
| Connection capacity rigid | 1.5 mm² ... 25 mm² |
| Connection capacity AWG | 16 ... 4 |
| Connection capacity flexible | 1.5 mm² ... 16 mm² |
| Connection capacity AWG | 16 ... 6 |
| 2 conductors with same cross section, solid | 1 mm² ... 6 mm² |
| 2 conductors with the same cross-section AWG rigid | 18 ... 10 |
| 2 conductors with same cross section, stranded | 1 mm² ... 4 mm² |
| 2 conductors with the same cross-section AWG flexible | 18 ... 12 |
Dimensions| Width | 12.2 mm |
| End cover width | 2.2 mm |
| Height | 54.4 mm |
| Height NS 35/15 | 62.5 mm |
| Height NS 35/7,5 | 55 mm |
| Length | 55.5 mm |
Material specifications| Color | gray |
| Flammability rating according to UL 94 | V0 |
| Insulating material group | I |
| Insulating material | PA |
| Static insulating material application in cold | -60 °C |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 130 °C |
| Relative insulation material temperature index (Elec., UL 746 B) | 130 °C |
| Fire protection for rail vehicles (DIN EN 45545-2) R22 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R23 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R24 | HL 1 - HL 3 |
| Fire protection for rail vehicles (DIN EN 45545-2) R26 | HL 1 - HL 3 |
| Calorimetric heat release NFPA 130 (ASTM E 1354) | 28 MJ/kg |
| Surface flammability NFPA 130 (ASTM E 162) | passed |
| Specific optical density of smoke NFPA 130 (ASTM E 662) | passed |
| Smoke gas toxicity NFPA 130 (SMP 800C) | passed |
Electrical tests| Surge voltage test |
| Test voltage setpoint | 9.8 kV |
| Result | Test passed |
| Temperature-rise test |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| Result | Test passed |
| Short-time withstand current 16 mm² | 1.92 kA |
| Result | Test passed |
| Power-frequency withstand voltage |
| Test voltage setpoint | 2.2 kV |
| Result | Test passed |
Mechanical properties| Mechanical data |
| Open side panel | Yes |
Mechanical tests| Mechanical strength |
| Result | Test passed |
| Attachment on the carrier |
| DIN rail/fixing support | NS 32/NS 35 |
| Test force setpoint | 5 N |
| Result | Test passed |
| Test for conductor damage and slackening |
| Rotation speed | 10 rpm |
| Revolutions | 135 |
| Conductor cross section/weight | 1.5 mm² / 0.4 kg |
| 16 mm² / 2.9 kg |
| 25 mm² / 4.5 kg |
| Result | Test passed |
Environmental and real-life conditions| Needle-flame test |
| Time of exposure | 30 s |
| Result | Test passed |
| Oscillation/broadband noise |
| Specification | DIN EN 50155 (VDE 0115-200):2018-05 |
| Spectrum | Service life test category 2, bogie-mounted |
| Frequency | f1 = 5 Hz to f2 = 250 Hz |
| ASD level | 6.12 (m/s²)²/Hz |
| Acceleration | 3.12g |
| Test duration per axis | 5 h |
| Test directions | X-, Y- and Z-axis |
| Shocks |
| Specification | DIN EN 50155 (VDE 0115-200):2008-03 |
| Pulse shape | Half-sine |
| Acceleration | 30g |
| Shock duration | 18 ms |
| Number of shocks per direction | 3 |
| Test directions | X-, Y- and Z-axis (pos. and neg.) |
| Ambient conditions |
| Ambient temperature (operation) | -60 °C ... 105 °C (max. short-term operating temperature RTI Elec.) |
| Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Ambient temperature (assembly) | -5 °C ... 70 °C |
| Ambient temperature (actuation) | -5 °C ... 70 °C |
| Permissible humidity (storage/transport) | 30 % ... 70 % |
Standards and regulations| Connection in acc. with standard | IEC 60947-7-1 |
Mounting| Mounting type | NS 35/7,5 |
| NS 35/15 |
In order for the Goods to be eligible for a return, please make sure that:
The Goods were purchased in the last 14 days
The Goods are in the original packaging
The Goods were not used or damaged
