The store will not work correctly in the case when cookies are disabled.
Product properties| Product type | Feed-through terminal block |
| Number of connections | 2 |
| Number of rows | 1 |
| Potentials | 1 |
| Insulation characteristics |
| Overvoltage category | III |
| Degree of pollution | 3 |
Electrical properties| Rated surge voltage | 6 kV |
| Maximum power dissipation for nominal condition | 1.31 W |
Connection data| Nominal cross section | 6 mm² |
| 1 level |
| Screw thread | M4 |
| Tightening torque | 1.5 ... 1.8 Nm |
| Stripping length | 11 mm |
| Conductor cross section solid | 0.5 mm² ... 10 mm² |
| Cross section AWG | 20 ... 8 |
| Conductor cross section flexible | 0.5 mm² ... 6 mm² |
| Conductor cross section, flexible [AWG] | 20 ... 10 |
| Flexible conductor cross section flexible (ferrule, w/o plastic sleeve) | 0.5 mm² ... 6 mm² |
| Flexible conductor cross section (ferrule with plastic sleeve) | 0.5 mm² ... 4 mm² |
| 2 conductors with same cross section, solid | 0.5 mm² ... 1.5 mm² |
| 2 conductors with same cross section, flexible | 0.5 mm² ... 4 mm² |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.5 mm² ... 4 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 4 mm² |
| Nominal current | 41 A |
| Maximum load current | 57 A (with 10 mm² conductor cross section) |
| Nominal voltage | 500 V |
| Nominal cross section | 6 mm² |
Dimensions| Width | 8.2 mm |
| Height NS 35/7,5 | 53.5 mm |
| Height | 2.106 " |
| Length | 61 mm |
Material specifications| Color | gray |
| Flammability rating according to UL 94 | V2 |
| Insulating material group | I |
| Insulating material | PA |
| Static insulating material application in cold | -40 °C |
| Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) | 125 °C |
| Relative insulation material temperature index (Elec., UL 746 B) | 125 °C |
Electrical tests| Surge voltage test |
| Test voltage setpoint | 7.3 kV |
| Result | Test passed |
| Temperature-rise test |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| Result | Test passed |
| Test passed |
| Short-time withstand current 6 mm² | 4.1 kA |
| Result | Test passed |
| Power-frequency withstand voltage |
| Test voltage setpoint | 1.89 kV |
| Result | Test passed |
Mechanical properties| Mechanical data |
| Open side panel | Yes |
Mechanical tests| Mechanical strength |
| Result | Test passed |
| Attachment on the carrier |
| DIN rail/fixing support | NS 32/NS 35 |
| Test force setpoint | 5 N |
| Result | Test passed |
| Test for conductor damage and slackening |
| Rotation speed | 10 rpm |
| Revolutions | 135 |
| Conductor cross section/weight | 0.5 mm² / 0.3 kg |
| 6 mm² / 1.4 kg |
| 10 mm² / 2 kg |
| Result | Test passed |
Environmental and real-life conditions| Aging |
| Temperature cycles | 192 |
| 192 |
| Needle-flame test |
| Time of exposure | 30 s |
| Result | Test passed |
| Ambient conditions |
| Ambient temperature (operation) | -60 °C ... 105 °C (max. short-term operating temperature RTI Elec.) |
| Ambient temperature (storage/transport) | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Ambient temperature (assembly) | -5 °C ... 70 °C |
| Ambient temperature (actuation) | -5 °C ... 70 °C |
| Permissible humidity (storage/transport) | 30 % ... 70 % |
Standards and regulations| Connection in acc. with standard | IEC 60947-7-1 |
Mounting| Mounting type | NS 35/7,5 |
| NS 35/15 |
| NS 32 |
In order for the Goods to be eligible for a return, please make sure that:
The Goods were purchased in the last 14 days
The Goods are in the original packaging
The Goods were not used or damaged
